Goal Zero Yeti 1000X Review – Portable Power Station (983Wh)

If the Yeti 500X felt like a portable power boost, the Goal Zero Yeti 1000X is the next step up for bigger needs. It stores about 983 watt-hours of energy (roughly 997 Wh rated) and provides up to 1,500W continuous AC output. In practical terms, that means it can run medium appliances (think power tools, large fans, or multiple devices) for hours, or smaller gear all day. For example, it could power a standard 60W refrigerator for around 14 hours or charge an iPhone 12 dozens of times. The 1000X weighs about 31.7 pounds, which is heavy but still manageable for carrying short distances. It has a compact wide-flat design with a built-in fold-down handle.

Inside, the Yeti 1000X uses a premium aluminum shell and a hollow top where you can stow cables. All the outlets (AC, USB, car) are on the front. It includes two 120V AC outlets (1500W total), two USB-A ports, two USB-C ports (one 60W PD, one 18W), a 12V car port and a 6mm port. The PD USB-C is great for laptops. The AC inverter is pure sine wave, so sensitive electronics (laptops, audio equipment, TVs) are safe. An LCD screen tells you battery percentage, input/output watts, and remaining run time.

The recharging options are multiple: AC wall adapter (included, about 230W charge), 12V car charger, or solar panels. The 1000X even supports AC + solar together for faster charging. Goal Zero says you can charge it in ~4 hours with a fast charger. The onboard MPPT controller means solar charging (if you connect panels) is efficient. This makes the 1000X useful in extended off-grid or emergency use: you could have solar panels on your RV or cabin and keep the Yeti topped up all day.

In reviews, the 1000X is often praised for build quality and ease of use. AppleInsider’s test found the 983Wh capacity is “relatively low” for the $1300 price (but prices have since dropped). Its strength is in reliability and expansion. It can be linked to other Yeti X units for more power, or used with the Yeti Home Integration Kit to back up home circuits (although that kit is more for 3000W units). On camping trips, people like that it can run a coffee maker, microwave, or small freezer without blinking.

The main trade-offs: it is a bit heavy at 32 lbs. Also, its battery is NMC lithium-ion, rated for about 500 cycles to 80% capacity, which is standard but far below LFP types (more on that later). If you expect very frequent use, you might need a plan to replace it after a few years. But for occasional outdoor use or backup, it lasts a long time.

In a nutshell: The Yeti 1000X is a solid mid-sized power station. It’s powerful enough for heavy devices (1500W AC) yet still portable. The 60W USB-C port is handy for modern gear. Just plan for its weight and slower battery chemistry. With a ~983Wh battery, it can run multiple devices for hours, making it a workhorse on larger camping rigs or emergency kits.

Product Description: The Goal Zero Yeti 1000X is a large portable battery generator. It stores about 983Wh of energy in a lithium-ion battery. It has a sturdy aluminum chassis with a wide top and built-in storage compartment. Outlets include 2× AC (1500W total), 2× USB-A, 2× USB-C (one 60W PD), 1× 12V car port and 1× 6mm port. The display shows battery %, input/output watts, and time remaining. The unit itself weighs ~31.7 lbs. It recharges from wall AC (with the 230W adapter), a 12V car, or solar panels (via built-in MPPT). Designed for camping and emergency backup, it can power larger appliances or multiple gadgets at once.

Goal Zero Yeti 1000X vs 1500X – Choosing Between Medium and Large Yeti Models

The 1000X and 1500X are siblings in the Yeti X lineup. The 1500X simply has more capacity and power than the 1000X, at the cost of size, weight and price. Key numbers: Capacity – 1500X: 1516Wh, 1000X: 997Wh. AC Output – 1500X: 2000W continuous (3500W surge), 1000X: 1500W (3000W surge). Weight – 1500X: ~45.6 lbs, 1000X: ~31.7 lbs. Physical size – 1500X is bigger (approx 15.3×10.2×10.4 in), 1000X is slightly smaller (15.25×10.23×9.86 in). Both have similarly good port selections.

So, is the extra size worth it? It depends on your needs. The 1500X holds ~50% more energy, so you can run high-power equipment for much longer. For example, if you wanted to run two space heaters (1500W each) in a small cabin during a outage, the 1500X (2000W inverter) could handle that load (with careful management), while the 1000X might be overloaded. Or, if you want days of backup power, the 1500X’s larger battery would last longer. The trade-offs: at ~45 lbs it’s heavy, and it costs roughly $400-$500 more than the 1000X. In fact, after Goal Zero’s price cuts, the 1500X can be cheaper per watt-hour than the 1000X, but still heavier to lug around.

In use, the 1000X is more “grab-and-go” friendly. Its 32-pound weight is still hefty, but easier to place on a car seat or carry a short distance. The 1500X at 46 lbs is better suited to a base camp or home standby. If you’re an RV’er with ample storage space and electricity needs, the 1500X is great. If you’re backpacking in (or prefer lighter loads), the 1000X’s smaller size is appealing.

In summary: the 1500X nearly doubles the runtime and increases power. If you regularly need to run devices for extended periods (say multiple nights of lights, TVs, or medical equipment), the extra Wh matters. If you only occasionally need heavy loads, the 1000X offers a balance of capability and portability. One way to decide is: if you want to run something at or near 1500W for hours (like a large motor or freezer), go 1500X. If your equipment peaks at ~1000W, the 1000X is sufficient.

Overall, both use the same design and ports, so it’s really a question of capacity vs weight. The specs say it clearly: 1516Wh & 2000W vs 997Wh & 1500W. In our view, the 1500X is the better long-term backup, while the 1000X is easier to handle and still very capable.

---

Goal Zero Yeti 1000X vs Bluetti EB150/AC200P – How Does Yeti Stack Up?

It’s useful to compare the Yeti 1000X with similar offerings from Bluetti, a popular rival. The Bluetti EB150 and AC200P are often mentioned in the same context. The EB150 has about 1500Wh capacity and a 1000W inverter (1200W surge). The AC200P has 2000Wh and a 2000W inverter (4800W surge).

By contrast, the Yeti 1000X is in the midrange: ~997Wh and 1500W inverter. So in raw capacity, the Yeti 1000X is smaller than both Bluettis. Compared to the EB150, it has less battery (997 vs 1500Wh) but a stronger inverter (1500W vs 1000W). That means it can run higher-wattage appliances than the EB150 (up to 1500W, while EB150 tops out at 1000W). The EB150 is lighter (37.9 lbs vs Yeti’s 31.7 lbs), and has LiPo cells rated for ~2500 cycles. The Yeti’s NMC cells are rated around 500 cycles, so EB150 might outlast it in longevity.

Against the bigger AC200P, the Yeti is smaller on all fronts: the AC200P’s 2000Wh battery gives twice the runtime, and its 2000W inverter can run most home circuits easily. The AC200P also uses LiFePO4 chemistry (3500+ cycles), so it’s designed for many years of use. However, the AC200P is very heavy (~60 lbs) and bulky, whereas the Yeti 1000X is more portable (32 lbs vs 62 lbs).

All three have lots of ports. The Yeti 1000X has dual USB-C, which the Bluetti AC200P lacks (it has only one 15W USB-C).

So the Yeti 1000X is a middle ground. It doesn’t give you as long run-time as the Bluetti, but it can power a higher-wattage device and charges USB-C devices faster. Cycle life is a weakness for the Yeti: Bluetti’s LiFePO4 can take 2500-3500 cycles, versus the Yeti’s ~500 cycles. If you plan to use it daily for many years, that is a consideration. On the other hand, Bluetti’s larger models are much heavier and pricier.

For many outdoors users, the Yeti 1000X’s compact power and modern ports make it appealing. A tech review pointed out it’s priced higher, but it fits the Yeti ecosystem and is easy to expand with Goal Zero panels or expansions. The Bluetti AC200P, with its huge battery and cycle life, is more for stationary use or RVs where weight matters less. In short: If you need lighter weight and USB-C charging, the Yeti is strong; if you need more runtime and don’t mind extra heft, Bluetti has the edge.